Perlick Glasswasher

Features:

Model No. PKBR24 PKBR24L PKBR24R
Description Front Loading
Glasswasher
Left Loading
Glasswasher
Right Loading
Glasswasher
Price $4,322.35 $4,322.35 $4,322.35
ELECTRICAL 120 V, 60 Hz. Single Phase. A.C. 5.4 amps, furnished with 6' power cord and standard 3 prong NEMA style 5-15P
PLUMBING Hot Water Inlet Connection: 1/2"NPTM.
Incoming Hot Water: 130-140oF. at 30-60 psi with a flow rate of 4.0 gal/min.
Drain:1 1/4" IPS PVC socket connection to include an air gap.
Important: This glasswasher must be installed with a full flow shut-off valve, water hammer arrestor and union. Failure to install a water hammer arrestor can damage the hot water solenoid valve. Machine failure due to improper installation is not covered by Perlick's warranty.
WATER HARDNESS Water containing more than 15 GPG will require a water softener. Caution: Parts failure caused by hard water are not covered under Perlick's warranty.
DETERGENT, SANITIZER, and
RINSE AID
Detergent: A heavy-duty liquid warewashing detergent containing water conditioners.
Chlorine Sanitizer: Any EPA registered chlorine can be used. The EPA marking can be found on the container label.
Rinse Aid: A low-foaming warewashing rinse aid containing water conditioners.
OPTIONAL
ACCESSORIES
#55021 - Plumber's Hookup Kit
#50470-2 - Glass Rack
TECHNICAL DATA
Wash Tank Capacity (gals.) - 1     Wash Pump Capacity (gals./min.) - 24
Cycle Time (sec.) - 120     Drain Flow (gals/cycle) - 1.67
Wash Time (sec.) - 60     Exhaust Requirement - None
Sanitizer Time (sec.) - 35     Maximum Glass Height - 10"
Glasses Washed Per Hour
(2 1/2" diam.) - 720
  Shipping Wt. (lbs.) - 225
Tank Heater (watts) - 650    
Glasswasher
Accessories
Model No. Description Price
GH72 Glass Handling Station $6,188.50
7057-1 Glass Prep Cabinet $1,256.50
7052-2 Glass Storage Cabinet $809.65
54838 1/2" Water Hammer Arrrestor / 1 Required $28.00
54839 1/2" NPF Shut-Off Valve / 1 Required $5.50
50470-2 Glass Rack for 24" Glasswasher $96.00
61945 Kit, Low Sanitizer Shutdown $172.00

All plumbing and chemical lines must be routed so that the glasswasher can be pulled out for service.